Solar photovoltaic modules

POE Encapsulant Film

POE encapsulant film from Bouling Chemical Co., Limited for photovoltaic module makers. A polyolefin-based encapsulant with low water vapour transmission, high volume resistivity and no acetic acid release, qualified for TOPCon, HJT and bifacial glass-glass designs.

POE encapsulant film roll
POE Encapsulant Film
Polyolefin encapsulant supplied in roll form for module lamination.
About the Product

What POE Encapsulant Does

POE encapsulant film is a polyolefin elastomer layer placed between glass, cells and backsheet in a photovoltaic module. It bonds the stack, insulates the circuitry and protects the cells from moisture. Compared with EVA, its saturated olefin structure has no hydrolysable ester groups, so it does not generate acetic acid under damp heat.

The result is a module with lower water vapour ingress and higher volume resistivity, which reduces the risk of potential-induced degradation. That matters most for high-efficiency cell types and dual-glass constructions, where long-term power retention depends on the encapsulant staying clear and insulating.

Chinas photovoltaic encapsulation industry has several established film producers, including Hangzhou First Applied Material Co., Ltd., Shanghai HIUV New Materials Co., Ltd., Jiangsu Sveck New Material Co., Ltd. and Suzhou Cybrid Applied Technology Co., Ltd. Bouling Chemical Co., Limited works alongside this supply chain, providing POE encapsulant film to module assemblers who need documented material performance and batch consistency.

Polyolefin Elastomer
Anti-PID
Low WVTR
No Acetic Acid
Dual-Glass Ready
Photovoltaic module production
POE Film
Polyolefin elastomer encapsulant
For high-reliability PV modules
Product Overview

POE Film Data

Attributes buyers check first when qualifying a POE encapsulant source.

Product namePOE encapsulant film
Base resinPolyolefin elastomer (POE)
StructureEthylene and alpha-olefin copolymer
Ester groupsNone - no acetic acid formed
Water vapour barrierLow WVTR, about one eighth of EVA
Volume resistivityHigh, above 1 x 10^15 ohm cm
PID resistanceStrong anti-PID performance
Light transmittanceHigh, above 91 percent in 380-1100 nm
Module compatibilityTOPCon, HJT, PERC, bifacial, glass-glass
Crosslinked POE
Peroxide-cured film for standard lamination lines; high gel content and strong creep resistance.
UV-Cut POE
Blocks short-wavelength UV for transparent backsheet and high-reliability modules.
Thermoplastic TPO
Low-temperature encapsulation option for perovskite and thin-film modules.
POE encapsulant film roll
Applications

Where It Is Used

POE encapsulant is specified where moisture and PID resistance decide module lifetime.

Bifacial & Dual Glass

Used on both sides of glass-glass modules, where near-zero water ingress and stable insulation protect the rear cell surface over a 30-year service life.

Dual Glass
Low WVTR
Anti-PID

TOPCon Cells

High volume resistivity limits sodium-ion migration, protecting passivated contacts from power loss under system voltage.

HJT Modules

Low-temperature lamination and low shrinkage suit temperature-sensitive heterojunction cells.

Perovskite & Thin Film

Thermoplastic grades encapsulate moisture-sensitive layers without high-temperature curing.

Transparent Backsheets

UV-cut POE variants shield the backsheet while keeping high visible-light transmission.

Utility & Distributed PV

From utility-scale ground mounts to rooftop arrays, POE film helps keep power degradation low in hot and humid climates.

Packaging & Delivery

Roll Supply

Film is shipped as wound rolls with moisture-protective wrapping and batch identification.

Film rolls wrapped for shipment
  • 01

    Wound Film Rolls

    Encapsulant film is wound onto cores and sealed to keep the surface clean and dry before lamination.

  • 02

    Moisture Protection

    Each roll is wrapped in a moisture-barrier bag with desiccant, then packed to prevent deformation in transit.

  • 03

    Batch Labelling

    Roll labels carry the product grade, production lot and date so every delivered roll can be traced to its batch file.

  • 04

    Container Loading

    Rolls are palletised and loaded into containers, with the packing list and seal numbers supplied with the shipment.

Quality & Documents

Batch Documentation

Each lot is checked before release, and the documents travel with the goods.

Quality inspection in the laboratory

Encapsulant film is sampled at production for optical, electrical and lamination checks. A retained sample from the shipped lot is kept until the buyer accepts the goods, so any query can be traced back to the exact roll.

  • Certificate of analysis issued for the shipped batch
  • Technical data sheet for the selected film grade
  • Safety data sheet in the language the site requires
  • Gel content and transmittance results on request
  • Packing list with roll counts and container seal numbers
Buyer Questions

POE Encapsulant FAQ

Common points raised when a module maker evaluates POE film.

Request POE Encapsulant Quotation

Tell us your cell type, module structure and annual volume, and we will reply with the film grade and a quotation. For urgent enquiries, call or message directly.

WhatsApp QR code

Scan to chat with

Julie Gong